Product ID: 1990

PCD Wire Drawing Dies

Product Overview

Available for most wire drawing operations, these products are offered in a wide range of diameters and are suitable for both wet and dry drawing applications, as well as pressure and non-pressure applications.

Enquire about this product

Categories: , , Brand:

Polycrystalline diamond (PCD) wire drawing dies are suitable for a variety of applications. PCD dies are highly resistant to wear and provide an excellent surface finish for wires. They are effective for drawing both ferrous and non-ferrous wires.

COPPER (REQUIRED DC PARAMETERS) -PCD
SIZE RANGEREDUCTION ANGLETOLERANCEBEARING LENGTHB/L Tol..%
0.080-1.00014*-16*+0.002/-0.00020%-25%± 5%
1.001-200016*-18*+0.003/-0.00020%-25%± 5%
2.001-4.00016*-18*+0.005/-0.00020%-25%± 5%
4.001-8.00018*-20*+0.010/-0.00020%-25%± 5%
COPPER (REQUIRED QC PARAMETERS) -NATURAL DIAMOND
0.050-0.50014*-16*+0.001/-0.00020%-25%± 5%
TIN PLATED COPPER (REQUIRED QC PARAMETERS) -PCD
For All Sizes16*-18*+0.002/-0.00020%-25%± 5%
MULTI WIRE (AS PER NIEHOFF DIE SERIES)
0.050-0.50014*-16*+0.001/-0.00040%-45%± 5% (N.D)
0.501-1.60014*-16*+0.002/-0.00040%-45%± 5% (PCD)
E.C/ALLUMINIUM (REQUIRED LIC PARAMETERS) -PCD
0.500-1.00015*-17*+0.005/-0.00020%-25%± 5%
1.001-4.00015*-17*+0.008 (Pin pass)20%-25%± 5%
4.001-6.00015*-17*+0.010 (Pin pass)20%-25%± 5%
6001-10.00016*-18*+0.010 (Pin pass)20%-25%± 5%
ALLOY (REQUIRED QC PARAMETERS) PCD
For All Sizes15*-17*+0.010 (Pin pass)30%-35%± 5%
BUNCHING DIE (REQUIRED QC PARAMETERS) PCD
Below 8.00 mm22*-24*+0.002/-0.00020%-25%± 5%

Secret Link